DM-PMIC-LDO-1A-33
Ask about this product
Send your application details and get a specification answer within one business day.
5 A 18 V Synchronous Buck Converter, SO-8EP
5 A synchronous step-down converter, 4.5 to 18 V input, adjustable output from 0.8 V, 500 kHz switching, in an SO-8 with exposed pad. Integrated high-side and low-side switches.
| Parameter | Value | Unit |
|---|---|---|
| Input voltage range | 4.5 to 18 | V |
| Output current | 5 | A continuous |
| Output voltage | 0.8 to 0.9 × VIN | V adjustable |
| Reference voltage | 0.8 | V ±1% |
| Switching frequency | 500 | kHz |
| Quiescent current | 45 | µA typical |
| High-side switch resistance | 45 | mΩ |
| Low-side switch resistance | 25 | mΩ |
| Package | SO-8 with exposed pad | |
| Operating temperature | −40 to +125 | °C |
Overview
This is the converter that replaces a linear regulator on a 12 V rail without a heatsink. Integrated switches, a 500 kHz operating point and a 0.8 V reference mean a small inductor and two ceramic capacitors complete the circuit, which keeps the power stage inside a few square centimetres.
The exposed pad is the ground and the thermal path at the same time, so the layout has to give it a copper plane with vias. Five amps at 90% efficiency is roughly 1.5 W to remove from a 3 × 3 mm body; without the pad and vias, the part will derate itself through thermal shutdown.
Key features
- 4.5 to 18 V input, 5 A continuous output
- Integrated high-side and low-side MOSFETs
- Adjustable output from a 0.8 V reference
- 500 kHz switching for a compact inductor
- Exposed pad for thermal transfer to the board
Typical applications
- 12 V to 5 V and 3.3 V point-of-load conversion
- Industrial control board supplies
- Set-top and networking equipment rails
- 24 V systems with an input filter
Selection note
Keep the input capacitor loop small and place it between VIN and the exposed pad. Loop area, not component value, is what decides whether the converter meets its conducted emissions target.
Ordering
Send the input range, output voltage and current, plus the enclosure ambient. We confirm the thermal margin and passive values, then quote with the reference schematic.
No documents attached yet.
Request documentation →Related products
View allDM-PMIC-BUCK-3A-36V
36 V 3 A Synchronous Buck Converter, DFN-10
DM-PMIC-LSW-DUAL-2A