DM-CCL-AL-16
Ask about this product
Send your application details and get a specification answer within one business day.
FR-4 Copper-Clad Laminate, 1.6 mm, 1 oz, 1220 × 1020 mm
Standard FR-4 copper-clad laminate, 1.6 mm, 1 oz copper both sides, 1220 × 1020 mm sheet, Tg 135 to 140. The base material for general-purpose two- and four-layer PCB builds.
| Parameter | Value | Unit |
|---|---|---|
| Material | FR-4, woven glass / epoxy | |
| Thickness | 1.6 | mm ±0.13 |
| Copper weight | 1 / 1 | oz both sides |
| Sheet size | 1220 × 1020 | mm |
| Glass transition temperature | 135 to 140 | °C |
| Dielectric constant | 4.5 to 4.7 | at 1 MHz |
| Dissipation factor | 0.018 | at 1 MHz |
| Flammability | UL 94 V-0 | |
| Peel strength | 1.4 | N/mm minimum |
| Surface resistivity | 10^6 | MΩ minimum |
Overview
FR-4 is a woven glass cloth impregnated with epoxy and cured under pressure with copper foil on both faces. It is not the best material in any single category, but it is good enough in all of them, cheap, and available everywhere, which is why almost every board is built on it.
Tg is the specification to check first. At 135 °C the material softens enough that repeated thermal cycles cause barrel cracking in plated holes; a board that runs hot or goes through lead-free reflow more than twice is better on a 170 °C material, even at a higher price.
Key features
- Standard 1.6 mm, 1 oz construction for general builds
- 1220 × 1020 mm sheet, the common panel format
- Tg 135 to 140 °C, suitable for lead-free reflow
- UL 94 V-0 flammability rating
- Consistent dielectric constant for impedance work
Typical applications
- General-purpose PCB fabrication
- Two- and four-layer stackups
- Industrial control and power boards
- Prototype and low-volume production
Selection note
Confirm the Tg against the assembly process. Two passes through lead-free reflow plus a repair cycle will exceed what a 135 °C material tolerates in a thick board with small holes.
Ordering
Send the thickness, copper weight, sheet size and quantity. We confirm Tg, colour and any UL marking requirement, then quote.
No documents attached yet.
Request documentation →Related products
View allDM-CCL-HTG-170
High-Tg FR-4 Laminate, Tg ≥170 °C, 1.6 mm, 1 oz
DM-CCL-THN-08