DM-CCL-THN-08
Ask about this product
Send your application details and get a specification answer within one business day.
High-Tg FR-4 Laminate, Tg ≥170 °C, 1.6 mm, 1 oz
High glass-transition FR-4, Tg 170 °C minimum, 1.6 mm with 1 oz copper. Lower Z-axis expansion and better thermal cycling for multilayer boards and lead-free assembly.
| Parameter | Value | Unit |
|---|---|---|
| Material | High-Tg FR-4 | |
| Thickness | 1.6 | mm ±0.13 |
| Copper weight | 1 / 1 | oz both sides |
| Sheet size | 1220 × 1020 | mm |
| Glass transition temperature | 170 | °C minimum |
| Z-axis expansion | 3.0 | % before Tg, max |
| Decomposition temperature | 340 | °C |
| Dielectric constant | 4.4 to 4.6 | at 1 MHz |
| Flammability | UL 94 V-0 | |
| Peel strength | 1.4 | N/mm minimum |
Overview
The failure that high-Tg material prevents is barrel cracking in plated through holes. When a board heats past its Tg the epoxy expands much faster along the Z axis than the copper barrel does, and the plating stretches. Repeat that a few hundred times and the barrel fractures.
The improvement is not linear with Tg. Moving from 135 to 170 °C cuts Z-axis expansion above the transition substantially and raises the decomposition temperature, so the board survives more reflow cycles and wider thermal swings. For a board with many layers and small holes, that margin is the difference between a ten-year life and a field failure.
Key features
- Tg 170 °C minimum, 340 °C decomposition temperature
- Reduced Z-axis expansion for plated hole reliability
- Suitable for lead-free assembly and rework cycles
- Compatible with standard FR-4 processing
- UL 94 V-0, 1.6 mm, 1 oz both sides
Typical applications
- Multilayer boards with high layer counts
- Automotive and under-hood electronics
- Power supplies and motor drives
- Boards subject to repeated thermal cycling
Selection note
High-Tg material costs more and needs a slightly different lamination profile. Specify it when the thermal cycle count or the layer count justifies it, not as a default for every board.
Ordering
Send the layer count, hole sizes, thermal cycle requirement and quantity. We confirm the Tg grade and lamination profile, then quote.
No documents attached yet.
Request documentation →Related products
View allDM-CCL-AL-16
Aluminium Substrate Laminate, 1.6 mm, 100 µm Dielectric
DM-CCL-FR4-16