DM-BJT-P40-200M
Ask about this product
Send your application details and get a specification answer within one business day.
NPN Darlington Transistor, 100 V, 8 A, hFE 1000, TO-220
Monolithic NPN Darlington in TO-220, 100 V and 8 A, with minimum gain of 1000 so a logic pin can drive it directly. For relay, solenoid and motor loads that need high current gain rather than low saturation voltage.
| Parameter | Value | Unit |
|---|---|---|
| Polarity | NPN Darlington | |
| Collector-emitter VCEO | 100 | V |
| Collector current | 8 | A continuous |
| DC current gain hFE | 1000 minimum | at IC = 3 A |
| Collector-emitter saturation | 2 | V at IC = 3 A, IB = 3 mA |
| Base-emitter on voltage | 2.5 | V maximum |
| Power dissipation | 70 | W at TC = 25 °C |
| Integrated resistors | Base-emitter shunt network | |
| Package | TO-220 | |
| Operating temperature | −65 to +150 | °C |
Overview
A Darlington is two transistors in series inside one package. The gain multiplies, so 3 mA of base current controls 3 A of collector current, which means a microcontroller pin drives the load through one resistor and nothing else.
The price is a saturation voltage of about 2 V instead of 0.3 V. At 3 A that is 6 W in the device, so a Darlington belongs on loads that switch infrequently and can tolerate the lost rail voltage. For a 24 V relay coil the 2 V drop is irrelevant; for a 5 V motor it is 40 percent of the supply.
Key features
- Minimum gain 1000 lets a logic pin drive 3 A directly
- VCEO 100 V, 8 A continuous
- Integrated base-emitter resistors reduce leakage and part count
- TO-220 package with standard heatsink mounting
- Slower switching is an advantage on noisy inductive loads
Typical applications
- Relay and contactor coil drive
- Solenoid and valve actuation
- Automotive lamp and accessory switching
- Low-frequency motor control
Selection note
A Darlington cannot pull its collector below about 1 V, so it is the wrong choice for a low-voltage rail. Above 12 V the 2 V drop costs little; at 5 V it may leave the load under its minimum operating voltage.
Ordering
Send the load voltage, current, switching frequency and drive source. We confirm whether a Darlington or a MOSFET fits the duty cycle, then quote.
No documents attached yet.
Request documentation →Related products
View allDM-BJT-N100-6A
NPN Power Transistor, 100 V, 6 A, TO-220
DM-BJT-N40-200M