DM-BJT-N100-6A
Ask about this product
Send your application details and get a specification answer within one business day.
PNP Small-Signal Transistor, 40 V, 200 mA, SOT-23
Complementary PNP in SOT-23, 40 V and 200 mA, for high-side switching and push-pull output stages. Matched to the NPN part in the same series for symmetrical drive circuits.
| Parameter | Value | Unit |
|---|---|---|
| Polarity | PNP | |
| Collector-emitter VCEO | −40 | V |
| Collector current | −200 | mA continuous |
| DC current gain hFE | 100 to 300 | at IC = −10 mA |
| Collector-emitter saturation | −0.25 | V at IC = −10 mA, IB = −1 mA |
| Transition frequency | 250 | MHz |
| Power dissipation | 350 | mW at TA = 25 °C |
| Package | SOT-23 | |
| Operating temperature | −55 to +150 | °C |
Overview
A PNP switches the positive rail. That matters when the load must sit at ground potential rather than floating above a low-side switch, which is the usual requirement for sensors, shielded enclosures and anything with an exposed metal body.
The cost of high-side switching with a bipolar is that the base must be pulled below the emitter, so the drive signal has to swing to the supply rail. Driving a PNP from a 3.3 V pin on a 24 V rail needs an extra NPN or a level shifter in front of it. For low duty cycles and modest currents that is still cheaper and quieter than a P-channel MOSFET with its gate charge.
Key features
- Complementary to the NPN part for push-pull stages
- VCEO −40 V, 200 mA continuous
- Low saturation voltage keeps the load at full rail voltage
- SOT-23 footprint shared with the NPN counterpart
- Gain bins available for matched-pair use
Typical applications
- High-side load switching
- Push-pull and class-AB output stages
- Current sources and active loads
- Signal clamping and discharge paths
Selection note
For high-side switching from a lower-voltage logic pin, add an NPN inverter in front of the base. A direct connection will leave the PNP permanently on or permanently off depending on the rail ratio.
Ordering
Send the rail voltage, load current, drive source and whether the load must reference ground. We confirm polarity, gain bin and package, then quote.
No documents attached yet.
Request documentation →Related products
View allDM-BJT-N40-200M
NPN Small-Signal Transistor, 40 V, 200 mA, SOT-23
DM-BJT-D100-8A