DM-PCB-FX-2L
Ask about this product
Send your application details and get a specification answer within one business day.
2-Layer FR-4 Prototype PCB, 1.6 mm, 1 oz, HASL
Two-layer FR-4 prototype fabrication, 1.6 mm board, 1 oz copper, 6/6 mil trace and space, HASL finish. The standard quick-turn build for control boards, breakouts and first articles.
| Parameter | Value | Unit |
|---|---|---|
| Layers | 2 | layers |
| Base material | FR-4, Tg 135 to 140 | |
| Board thickness | 1.6 | mm ±10% |
| Copper weight | 1 | oz (35 µm) |
| Minimum trace / space | 6 / 6 | mil |
| Minimum drill | 0.3 | mm |
| Surface finish | HASL lead-free | |
| Solder mask | Green, other colours on request | |
| Board size | up to 400 × 500 | mm per panel |
| Electrical test | Flying probe, 100% net test |
Overview
A two-layer 1.6 mm board is the reference point for prototype fabrication. Almost every supplier can build it, the process is stable, and the price per square metre is the lowest of any stackup. When the design does not need controlled impedance or a ground plane, this is the build to order.
The 6/6 mil design rule is what separates a comfortable quote from an expensive one. At 6 mil the process runs with normal yield; at 4 mil the same board needs thinner copper, tighter registration and a different etch line, and the price rises before the quantity discount ever applies.
Key features
- Two layers, 1.6 mm FR-4, 1 oz copper
- 6/6 mil trace and space, 0.3 mm minimum drill
- Lead-free HASL finish, green solder mask
- 100 percent flying-probe electrical test
- Panel sizes up to 400 × 500 mm
Typical applications
- First-article and engineering prototypes
- Control and interface boards
- Breakout and adapter boards
- Low-volume production runs
Selection note
Values shown are the standard process window for this build. Trace width, annular ring and finish are confirmed against your Gerber and stackup drawing at quotation, and the confirmation prevails over this table.
Ordering
Send Gerber files, board outline, quantity, thickness and surface finish. We review the design rules, confirm the stackup, then quote.
No documents attached yet.
Request documentation →Related products
View allDM-PCB-4L-IMP
4-Layer PCB, Controlled Impedance, ENIG, 1.6 mm
DM-PCB-AL-16