DM-PCB-2L-16
Ask about this product
Send your application details and get a specification answer within one business day.
Aluminium Substrate PCB, 1.6 mm, 1-Layer, High Thermal
Single-sided aluminium substrate board, 1.6 mm, with a thermally conductive dielectric for LED arrays and power devices. Moves heat into the metal base instead of through the board.
| Parameter | Value | Unit |
|---|---|---|
| Layers | 1 | layer, single side |
| Base | Aluminium, 1.6 | mm |
| Dielectric thickness | 100 | µm |
| Thermal conductivity | 1.0 to 2.0 | W/m·K dielectric |
| Copper weight | 1 to 2 | oz |
| Minimum trace / space | 8 / 8 | mil |
| Surface finish | HASL lead-free | |
| Solder mask | White, high reflectance | |
| Board size | up to 300 × 500 | mm |
| Dielectric breakdown | 3 | kV |
Overview
FR-4 conducts heat at about 0.3 W/m·K, which makes it an insulator with a copper pattern on top. An aluminium substrate replaces the core with metal and keeps only a thin dielectric layer for isolation, so heat from an LED or a power device spreads sideways into the whole board instead of concentrating under the pad.
The construction is single-sided by nature: the aluminium base is conductive, so vias cannot pass through it. Anything that needs two layers, plated through holes or a via array under a thermal pad belongs on FR-4 with thermal vias, not on aluminium.
Key features
- Aluminium base with 100 µm thermally conductive dielectric
- 1.0 to 2.0 W/m·K, roughly five times FR-4 through-plane
- White high-reflectance solder mask for LED arrays
- 3 kV dielectric breakdown for safe isolation
- Single-sided, no plated through holes
Typical applications
- LED lighting arrays and modules
- Power device carriers
- Automotive lamp and sensor boards
- Heaters and thermal plates
Selection note
Aluminium boards are single-sided and cannot take through-hole plating. If the design needs vias under a thermal pad, use FR-4 with a via array and a metal-backed heatsink instead.
Ordering
Send Gerber, board outline, LED or device footprint, quantity and thermal requirement. We confirm the dielectric and mask, then quote.
No documents attached yet.
Request documentation →Related products
View allDM-PCB-4L-IMP
4-Layer PCB, Controlled Impedance, ENIG, 1.6 mm
DM-PCB-FX-2L