DM-CT-AC-50A-RMS
Ask about this product
Send your application details and get a specification answer within one business day.
Precision Current Shunt, 1 mΩ, ±0.5%, 10 W, 4-Terminal
Four-terminal current shunt, 1 mΩ ±0.5%, 10 W continuous, 50 ppm/°C. Produces 100 mV at 100 A with Kelvin connections so the measurement does not include the solder joints.
| Parameter | Value | Unit |
|---|---|---|
| Resistance | 1 | mΩ |
| Tolerance | ±0.5 | % |
| Temperature coefficient | 50 | ppm/°C, −40 to +125 °C |
| Continuous current | 100 | A |
| Power rating | 10 | W at 70 °C ambient |
| Voltage drop at rated current | 100 | mV |
| Termination | 4-terminal, M4 bolts and sense pins | |
| Element | Manganese-copper alloy | |
| Mounting | Busbar or panel | |
| Operating temperature | −40 to +125 | °C |
Overview
A shunt measures current by measuring voltage across a known resistance, so the accuracy of the measurement depends entirely on where the sense connections are made. Two-terminal shunts include the solder joint resistance in the reading; four-terminal parts bring out separate sense pins inside the element so the joint is excluded.
At 1 mΩ and 100 A the dissipation is 10 W, which is why the element is a solid metal bar rather than a film resistor. The temperature coefficient then becomes the dominant error: a 50 ppm/°C part that heats by 60 °C shifts by 3,000 ppm, or 0.3 percent, which is already most of the tolerance budget.
Key features
- Four-terminal Kelvin connection excludes joint resistance
- 1 mΩ ±0.5%, 100 mV at 100 A
- 10 W continuous rating in a solid alloy element
- 50 ppm/°C temperature coefficient
- M4 bolt terminals for direct busbar mounting
Typical applications
- Battery and DC bus current measurement
- Motor drive phase current sensing
- Charger and power supply output monitoring
- High-current protection thresholds
Selection note
Route the sense pair as a twisted pair back to the amplifier and keep them away from the load current path. A few millimetres of shared copper in the sense return adds more error than the shunt tolerance allows.
Ordering
Send the current range, acceptable voltage drop, ambient temperature and mounting style. We confirm the resistance value and thermal derating, then quote.
No documents attached yet.
Request documentation →Related products
View allDM-VT-DC-600V
DC Voltage Transducer, 0–600 V to 4–20 mA, DIN Rail
DM-CT-SC-100A