DM-HDR-254-1X40-F
Ask about this product
Send your application details and get a specification answer within one business day.
0.5 mm Pitch 20-Pin Board-to-Board Connector, 4 mm Stack
0.5 mm pitch board-to-board connector, 20 pins, 4.0 mm mated stack height, SMT, 0.5 A per pin. Header and receptacle supplied as a matched pair for parallel board stacking.
| Parameter | Value | Unit |
|---|---|---|
| Pitch | 0.5 | mm |
| Pin count | 20 | |
| Mated stack height | 4.0 | mm |
| Current rating | 0.5 | A per pin |
| Voltage rating | 50 | V AC/DC |
| Contact resistance | 20 | mΩ maximum |
| Durability | 30 | mating cycles |
| Contact plating | Gold flash over nickel | |
| Insulator | LCP, UL94 V-0 | |
| Mounting | SMT, header and receptacle pair |
Overview
Board-to-board connectors exist to join two PCBs without a cable, which removes a harness, two crimps and a pair of mating housings from the assembly. At 0.5 mm pitch and 4 mm stack height, this pair is what a mezzanine board uses when the two boards need to sit close and the signal count is modest.
The two things that decide reliability are coplanarity and mating alignment. Both boards must be flat at reflow, and the connector needs a boss or a pair of guide posts so that the contacts engage before they touch. Gold flash over nickel is adequate for 30 cycles; a product that will be opened repeatedly in the field needs a higher-specification plating.
Key features
- 0.5 mm pitch, 20 contacts in a low-profile body
- 4.0 mm mated stack height for parallel boards
- Header and receptacle supplied as a matched pair
- Gold flash contacts for reliable low-level signalling
- LCP insulator rated UL94 V-0
Typical applications
- Mezzanine boards on a main carrier
- Display and keypad sub-assemblies
- Sensor boards stacked behind a control board
- Compact modules that must be separable for service
Selection note
Confirm the stack height with both boards in hand before releasing the design. A 0.5 mm error at 4 mm is enough to prevent the pair from mating, and the error usually lives in the stack-up, not the connector.
Ordering
Send the pin count, stack height, current per contact and mating cycle requirement. We confirm the pair and the guide-post option, then quote the header and receptacle together.
No documents attached yet.
Request documentation →Related products
View allDM-BTB-08-60P-5H
0.8 mm Pitch 60-Pin Board-to-Board Connector, 5 mm Stack
DM-HDR-127-2X20