DM-BTB-05-20P-4H
Ask about this product
Send your application details and get a specification answer within one business day.
1.27 mm Pitch 2×20 Pin Header, Through-Hole
1.27 mm pitch dual-row pin header, 2 × 20 contacts, through-hole, 1 A per pin, gold flash. Half the footprint of a 2.54 mm header for ribbon and mezzanine connections.
| Parameter | Value | Unit |
|---|---|---|
| Pitch | 1.27 | mm |
| Configuration | 2 × 20, straight | |
| Current rating | 1 | A per pin |
| Voltage rating | 250 | V AC |
| Contact resistance | 20 | mΩ maximum |
| Insulator height | 2.5 | mm |
| Pin length | 3.0 | mm below insulator |
| Contact plating | Gold flash over nickel | |
| Insulator | PBT, UL94 V-0 | |
| Durability | 100 | mating cycles |
Overview
A 1.27 mm dual-row header carries the same 40 signals as a 2.54 mm part in a quarter of the board area, which is the reason it survives on boards that have run out of room. It is the standard interface for ribbon cable to a controller board and for stacking a small daughter card.
The through-hole pins give a mechanically stronger joint than an SMT header, which matters when a ribbon cable will be pulled during service. The trade is that the pins occupy space on every layer and complicate routing under the connector.
Key features
- 1.27 mm pitch, 40 contacts in two rows
- Through-hole pins for a mechanically robust joint
- Half the footprint of an equivalent 2.54 mm header
- Gold flash contacts, 100 mating cycles
- Compatible with standard 1.27 mm ribbon connectors
Typical applications
- Ribbon cable interface to a controller board
- Daughter card stacking
- Programming and debug headers on dense boards
- Signal breakout from a backplane
Selection note
If the cable will be connected and disconnected in service, specify a shrouded or latched mating connector. A bare pin header relies on friction alone.
Ordering
Send the pin count, row configuration, mounting style and mating connector type. We confirm the pin length against your board thickness, then quote.
No documents attached yet.
Request documentation →Related products
View allDM-BTB-08-60P-5H
0.8 mm Pitch 60-Pin Board-to-Board Connector, 5 mm Stack
DM-HDR-254-1X40-F