DM-BTB-05-20P-4H
Ask about this product
Send your application details and get a specification answer within one business day.
0.8 mm Pitch 60-Pin Board-to-Board Connector, 5 mm Stack
0.8 mm pitch board-to-board connector, 60 pins in two rows, 5.0 mm mated stack height, SMT, 0.5 A per pin. For high-signal-count mezzanine connections with a defined air gap.
| Parameter | Value | Unit |
|---|---|---|
| Pitch | 0.8 | mm |
| Pin count | 60 (2 × 30) | |
| Mated stack height | 5.0 | mm |
| Current rating | 0.5 | A per pin |
| Voltage rating | 100 | V AC/DC |
| Contact resistance | 25 | mΩ maximum |
| Durability | 50 | mating cycles |
| Contact plating | Gold, 0.2 µm over nickel | |
| Insulator | LCP, UL94 V-0 | |
| Mounting | SMT with locating bosses |
Overview
Sixty contacts at 0.8 mm pitch is the middle ground between a fine-pitch 0.5 mm connector, which is unforgiving to assemble, and a 1.27 mm header, which takes too much board area for the signal count. The 5 mm stack height leaves room for components on the facing side of the lower board.
The locating bosses are not cosmetic. At 60 contacts, a small lateral offset means the outer rows engage at an angle, and repeated mating in that condition wears the plating. Bosses force the pair to align before the contacts meet.
Key features
- 60 contacts in two rows at 0.8 mm pitch
- 5.0 mm mated stack height
- Locating bosses for alignment before contact
- Gold plating at 0.2 µm over nickel
- SMT tails compatible with standard reflow profiles
Typical applications
- High-signal-count mezzanine boards
- Camera and sensor module interfaces
- Stacked control and power boards
- Compact equipment with a defined board gap
Selection note
Check the total stack-up tolerance across both boards and the connector pair. At 0.8 mm pitch, the allowable misalignment is measured in tenths of a millimetre.
Ordering
Send the pin count, stack height, signal current and expected mating cycles. We confirm the pair and the boss layout, then quote.
No documents attached yet.
Request documentation →Related products
View allDM-HDR-254-1X40-F
2.54 mm Pitch 1×40 Female Header, Through-Hole
DM-HDR-127-2X20