DM-HDR-127-2X20
Ask about this product
Send your application details and get a specification answer within one business day.
2.54 mm Pitch 1×40 Female Header, Through-Hole
2.54 mm pitch single-row female header, 40 sockets, through-hole, 3 A per pin. Accepts standard 0.64 mm square pins for module and shield-board stacking.
| Parameter | Value | Unit |
|---|---|---|
| Pitch | 2.54 | mm |
| Configuration | 1 × 40, straight socket | |
| Current rating | 3 | A per pin |
| Voltage rating | 500 | V AC |
| Contact resistance | 20 | mΩ maximum |
| Accepts pin size | 0.64 × 0.64 | mm |
| Insulator height | 8.5 | mm |
| Contact plating | Gold flash over nickel | |
| Insulator | PBT, UL94 V-0 | |
| Durability | 500 | mating cycles |
Overview
The 2.54 mm female header is the socket half of the most common stacking interface in industrial electronics: a controller board with male pins plugs into it, and the whole assembly can be separated without tools. Three amps per pin is enough for a small power rail as well as signals.
The 8.5 mm insulator height sets the clearance between the two boards, which is often the deciding factor when a component on the lower board is tall. Breakaway versions are cut to length from a 40-way strip, so one part number covers several board variants.
Key features
- 2.54 mm pitch, 40 sockets, breakaway to length
- 3 A per pin for signals and low-power rails
- Accepts standard 0.64 mm square pins
- 500 mating cycles with gold flash contacts
- 8.5 mm insulator height for component clearance
Typical applications
- Module and shield-board stacking
- Controller board to carrier board interfaces
- Test fixtures and programming adapters
- Prototype boards with removable modules
Selection note
When cutting a breakaway strip, cut between positions and file the edge flat. A rough cut prevents the socket from seating squarely on the mating pins.
Ordering
Send the number of ways, row configuration and required clearance height. We confirm the pin size and plating, then quote per strip or per assembly quantity.
No documents attached yet.
Request documentation →Related products
View allDM-BTB-08-60P-5H
0.8 mm Pitch 60-Pin Board-to-Board Connector, 5 mm Stack
DM-BTB-05-20P-4H