DM-AEC-010M-50-0511
Ask about this product
Send your application details and get a specification answer within one business day.
1000 µF 35 V Snap-In Electrolytic, 105 °C
1000 µF 35 V snap-in aluminium electrolytic, 18 × 25 mm, 105 °C, 3,000 h. Bulk capacitance for AC-DC front ends and DC-link positions in power assemblies.
| Parameter | Value | Unit |
|---|---|---|
| Capacitance | 1000 | µF |
| Rated voltage | 35 | V DC |
| Case | Snap-in, 18 × 25 | mm |
| Lead spacing | 7.5 | mm |
| Category temperature range | −40 to +105 | °C |
| Load life | 3,000 h at 105 °C | |
| Ripple current | 1.4 A rms at 120 Hz, 105 °C | |
| Leakage current | ≤0.02 CV or 5 µA | |
| Capacitance tolerance | ±20 | % |
| Vent | Safety vent on can top |
Overview
Snap-in capacitors are what a power board uses when the value has to be in the thousands of microfarads and the capacitor has to survive mains-derived ripple. The 7.5 mm lead spacing locks the can to the board before soldering, and the safety vent releases pressure rather than letting the can burst if the electrolyte overheats.
At 1.4 A rms of ripple at 120 Hz, this part is specified for a rectified 50/60 Hz front end, not for the output of a 100 kHz converter. Match the ripple frequency to the rating, keep the vent clear of other components, and leave the top of the can unobstructed so it can vent upward.
Key features
- 1000 µF at 35 V in an 18 × 25 mm can
- 3,000 h load life at 105 °C
- 1.4 A rms ripple rating at 120 Hz
- Safety vent on the can top
- Snap-in leads hold the part during wave or hand soldering
Typical applications
- Bulk capacitance after bridge rectifiers
- DC-link smoothing in low-voltage power assemblies
- Input filter of AC-DC supplies up to a few hundred watts
- Energy storage on motor drive DC buses
Selection note
Do not obstruct the vent. In a horizontal mounting position, confirm with us that the intended orientation keeps the vent facing a free volume inside the enclosure.
Ordering
Send the bus voltage, ripple current and frequency, plus the height available above the board. We size the can and ripple rating accordingly and quote per unit.
No documents attached yet.
Request documentation →Related products
View allDM-AEC-101M-35-0810
100 µF 35 V SMD Aluminium Electrolytic, V-Chip
DM-AEC-221M-25-0812