DM-AEC-010M-50-0511
Ask about this product
Send your application details and get a specification answer within one business day.
100 µF 35 V SMD Aluminium Electrolytic, V-Chip
100 µF 35 V surface-mount aluminium electrolytic in an 8 × 10.5 mm V-chip can, 105 °C, 2,000 h. Reflow-compatible bulk capacitance for boards assembled without through-hole steps.
| Parameter | Value | Unit |
|---|---|---|
| Capacitance | 100 | µF |
| Rated voltage | 35 | V DC |
| Case | SMD V-chip, 8 × 10.5 | mm |
| Category temperature range | −40 to +105 | °C |
| Load life | 2,000 h at 105 °C | |
| Ripple current | 230 mA rms at 120 Hz, 105 °C | |
| Leakage current | ≤0.03 CV or 3 µA | |
| Capacitance tolerance | ±20 | % |
| Base | Insulated base, polarity notch | |
| Packaging | 500 pcs / reel |
Overview
The V-chip package puts an aluminium electrolytic through the same reflow oven as the rest of the board, which removes a hand-soldering step from any assembly that still needs electrolytic bulk capacitance at 35 V. The insulated base sits flat on the laminate and the polarity notch is visible after placement.
Reflow heat is the risk. Follow the profile in the datasheet and keep the can away from large thermal masses that hold heat after the oven. If the board also carries a 24 V rail with significant ripple, this part is a reasonable output capacitor; if the ripple is in amps, a snap-in or a bank of ceramics is the better structure.
Key features
- Reflow-compatible V-chip base
- 100 µF at 35 V in an 8 × 10.5 mm can
- 105 °C rating with 2,000 h load life
- Insulated base allows close placement to traces
- Reel packaging for automated placement
Typical applications
- Bulk capacitance on 24 V and 12 V rails
- Output filtering of low-power converters
- Automotive body and cabin electronics
- Boards assembled entirely by reflow
Selection note
V-chip capacitors are sensitive to reflow profile and to mechanical stress on the base. Avoid placing them next to board-break edges or mounting holes that flex during depanelling.
Ordering
Send the rail voltage, ripple and assembly method. We confirm the reflow rating and reel quantity, then quote with lead time confirmed per order.
No documents attached yet.
Request documentation →Related products
View allDM-AEC-221M-25-0812
220 µF 25 V Low-ESR Radial Electrolytic, 105 °C
DM-AEC-102M-35-SN18