DM-AEC-101M-35-0810
Ask about this product
Send your application details and get a specification answer within one business day.
10 µF 50 V Radial Aluminium Electrolytic, 105 °C
10 µF 50 V radial aluminium electrolytic capacitor, 5 × 11 mm, 105 °C, 1,000 h load life. Low-cost bulk capacitance for through-hole power entries and audio-grade filtering.
| Parameter | Value | Unit |
|---|---|---|
| Capacitance | 10 | µF |
| Rated voltage | 50 | V DC |
| Case | Radial, 5 × 11 | mm |
| Lead spacing | 2.0 | mm |
| Category temperature range | −40 to +105 | °C |
| Load life | 1,000 h at 105 °C | |
| Leakage current | ≤0.03 CV or 3 µA | |
| Capacitance tolerance | ±20 | % |
| Ripple current | 35 mA rms at 120 Hz, 105 °C | |
| Sleeve | PET, polarity marked |
Overview
A 10 µF 50 V radial is the small bulk capacitor on a through-hole board: after a bridge rectifier, behind a linear regulator, or across the supply entry of an analogue stage. The 105 °C rating and 1,000-hour load life put it in the ordinary industrial grade rather than the consumer grade, which matters because electrolyte loss is the dominant wear-out mode in any electrolytic.
Treat the ripple current rating as a hard limit, not a suggestion. At 35 mA rms the part is intended for low-ripple positions; putting it directly after a rectifier carrying hundreds of milliamps will heat the can and shorten life faster than the datasheet curve suggests.
Key features
- 105 °C rated, 1,000 h load life
- 5 × 11 mm can with 2.0 mm lead spacing
- Low leakage, suitable for coupling and timing positions
- Polarity marked sleeve for hand and wave assembly
- Wide availability in ±20% tolerance
Typical applications
- Bulk capacitance after small bridge rectifiers
- Supply filtering behind linear regulators
- Audio and analogue signal coupling
- Through-hole prototyping and repair stock
Selection note
Electrolytics age. In a hot enclosure, derate the rated life by roughly half for every 10 °C above 85 °C when estimating service life, and consider a ceramic or polymer part where the value allows.
Ordering
Tell us capacitance, voltage, case size and expected ripple. We confirm the can dimensions and lead spacing against your board, then quote quantity pricing.
No documents attached yet.
Request documentation →Related products
View allDM-AEC-221M-25-0812
220 µF 25 V Low-ESR Radial Electrolytic, 105 °C
DM-AEC-102M-35-SN18