DM-AEC-101M-35-0810
Ask about this product
Send your application details and get a specification answer within one business day.
220 µF 25 V Low-ESR Radial Electrolytic, 105 °C
220 µF 25 V low-ESR radial aluminium electrolytic, 8 × 11.5 mm, 105 °C, 2,000 h. Intended for switching supply output filters where ordinary ESR would overheat the can.
| Parameter | Value | Unit |
|---|---|---|
| Capacitance | 220 | µF |
| Rated voltage | 25 | V DC |
| Case | Radial, 8 × 11.5 | mm |
| Lead spacing | 3.5 | mm |
| Category temperature range | −40 to +105 | °C |
| Load life | 2,000 h at 105 °C | |
| Impedance at 100 kHz | ≤0.09 | Ω |
| Ripple current | 450 mA rms at 100 kHz, 105 °C | |
| Capacitance tolerance | ±20 | % |
| Leakage current | ≤0.03 CV or 3 µA |
Overview
The low-ESR series exists for one reason: a switching converter pushes high-frequency ripple through the output capacitor, and ESR turns that ripple into heat inside the can. At 0.09 Ω impedance at 100 kHz this part survives ripple that would cook a general-purpose electrolytic of the same capacitance.
It is still an electrolytic, so it is a wear item. Position it away from heatsinks and hot magnetics, keep the ripple below the rating after temperature correction, and expect the 2,000-hour life figure to apply at the full 105 °C rather than at the 40 °C inside a well-ventilated cabinet.
Key features
- Low impedance, 0.09 Ω maximum at 100 kHz
- 450 mA rms ripple rating at 105 °C
- 2,000 h load life at rated temperature
- 8 × 11.5 mm can, 3.5 mm lead spacing
- Suitable for reflow-adjacent positions with a heat shield
Typical applications
- Output filter of AC-DC and DC-DC converters
- Input bulk capacitance on 12 V and 24 V entries
- Motor drive supply smoothing
- Replacement for general-purpose parts that run hot
Selection note
If the capacitor sits within 10 mm of a switching device, check the actual can temperature in the enclosure before accepting the life estimate. ESR rises as the electrolyte dries, which accelerates the heating.
Ordering
Give us the ripple current, switching frequency and ambient at the capacitor. We size the can and series for the thermal load and quote per piece or per box.
No documents attached yet.
Request documentation →Related products
View allDM-AEC-102M-35-SN18
1000 µF 35 V Snap-In Electrolytic, 105 °C
DM-AEC-010M-50-0511