DM-HALL-A1-TO92
Ask about this product
Send your application details and get a specification answer within one business day.
Bipolar Latching Hall-Effect Sensor, SOT-23
Bipolar latching Hall-effect sensor in SOT-23, 3.5 to 24 V supply, open-collector output. Latches on one pole and releases on the opposite pole, for rotation and flow measurement.
| Parameter | Value | Unit |
|---|---|---|
| Supply voltage | 3.5 to 24 | V DC |
| Output type | Open collector, 20 mA sink | |
| Operate point | 30 | G typical (south pole) |
| Release point | −30 | G typical (north pole) |
| Supply current | 4 | mA |
| Output saturation voltage | 0.4 | V at 20 mA |
| Switching frequency | 0 to 20 | kHz |
| Package | SOT-23 | |
| Operating temperature | −40 to +150 | °C |
| Latch behaviour | Bipolar, alternating poles |
Overview
A latching sensor changes state on one magnetic pole and stays there until the opposite pole arrives. That is exactly the behaviour a rotating shaft needs: one output pulse per revolution, with no ambiguity about where the magnet stopped.
The two poles must both pass the sensor, which is why latching parts are used with a multipole ring magnet or a magnet arranged so the rotor presents alternating fields. With a single magnet and a single pole, the output will latch once and never change.
Key features
- Bipolar latching behaviour for rotation counting
- Operate and release at opposite magnetic poles
- 20 kHz switching for high-speed shafts
- Wide 3.5 to 24 V supply
- −40 to +150 °C operating range
Typical applications
- Rotation and RPM measurement
- Flow meters with a magnetic rotor
- Position latching on linear actuators
- Encoder replacement in dirty environments
Selection note
The magnet arrangement must present alternating poles to the sensor. A single-pole magnet gives one transition and then no further change, which reads as a stopped shaft.
Ordering
Send the shaft diameter, expected RPM, magnet arrangement and supply voltage. We confirm the operate point and the ring magnet option, then quote.
No documents attached yet.
Request documentation →Related products
View allDM-HALL-CS-50A
Hall-Effect Current Sensor Module, 50 A, ±0.7%
DM-HALL-U1-SOT23