DM-HALL-L1-SOT23
Ask about this product
Send your application details and get a specification answer within one business day.
Linear Hall-Effect Sensor, 0.5–4.5 V Ratiometric, TO-92
Ratiometric linear Hall-effect sensor in TO-92, 4.5 to 5.5 V supply, 0.5 to 4.5 V analogue output proportional to magnetic field. Position, current and angle measurement.
| Parameter | Value | Unit |
|---|---|---|
| Supply voltage | 4.5 to 5.5 | V DC |
| Output type | Ratiometric analogue | |
| Quiescent output | 2.5 | V at zero field |
| Sensitivity | 2.5 | mV/G |
| Measurement range | ±800 | G |
| Output voltage range | 0.5 to 4.5 | V |
| Supply current | 7 | mA |
| Output noise | 1.5 | mV rms |
| Package | TO-92, 3-lead | |
| Operating temperature | −40 to +125 | °C |
Overview
A linear Hall sensor reports field strength as a voltage, which turns a magnet into a position encoder: the output rises and falls smoothly as the magnet approaches, and an ADC resolves the distance. A ratiometric output scales with the supply, so noise on the 5 V rail cancels when the ADC uses the same reference.
Two and a half millivolts per gauss across ±800 G gives a usable range for a magnet moving a few millimetres, and 1.5 mV of noise sets the resolution floor. Averaging several samples in firmware is usually cheaper than specifying a lower-noise part.
Key features
- Ratiometric analogue output, 0.5 to 4.5 V
- 2.5 mV/G sensitivity, ±800 G range
- Zero-field output at mid-supply
- TO-92 package for through-hole assembly
- Linear response with no latching behaviour
Typical applications
- Non-contact position measurement
- Throttle and pedal position sensing
- Current measurement with a concentrator core
- Angle measurement with a diametric magnet
Selection note
Keep the sensor away from stray fields such as motor magnets and current-carrying conductors. A linear sensor reports every field in the area, not only the one the design intends.
Ordering
Send the measurement range, required resolution, supply voltage and magnet arrangement. We confirm sensitivity and linearity over the travel, then quote.
No documents attached yet.
Request documentation →Related products
View allDM-HALL-CS-50A
Hall-Effect Current Sensor Module, 50 A, ±0.7%
DM-HALL-U1-SOT23