DM-HALL-A1-TO92
Ask about this product
Send your application details and get a specification answer within one business day.
Unipolar Hall-Effect Switch, SOT-23, 3.3–24 V
Unipolar Hall-effect switch in SOT-23, 3.3 to 24 V supply, open-collector output, operate point 35 G. Position sensing, end-of-travel detection and rotation counting.
| Parameter | Value | Unit |
|---|---|---|
| Supply voltage | 3.3 to 24 | V DC |
| Output type | Open collector, 20 mA sink | |
| Operate point | 35 | G typical |
| Release point | 25 | G typical |
| Hysteresis | 10 | G typical |
| Supply current | 3.5 | mA |
| Output saturation voltage | 0.4 | V at 20 mA |
| Switching frequency | 0 to 20 | kHz |
| Package | SOT-23 | |
| Operating temperature | −40 to +125 | °C |
Overview
A unipolar switch turns on in the presence of one magnetic pole and off when the field drops below the release point. Ten gauss of hysteresis between the two thresholds is what stops the output chattering when the magnet sits exactly at the switching distance, which is the difference between a usable end-stop sensor and one that counts twice.
The open-collector output sinks current and needs a pull-up to the logic supply, which also makes it easy to interface to 24 V systems or to a PLC input through an optocoupler. Three point five milliamps of supply current is low enough for battery equipment that wakes on a magnet.
Key features
- 3.3 to 24 V supply range
- Open-collector output, 20 mA sink
- 10 G hysteresis prevents chatter
- 20 kHz switching capability
- SOT-23 package for compact assemblies
Typical applications
- End-of-travel and limit detection
- Rotation counting on shafts
- Door, lid and drawer position sensing
- Reed switch replacement in harsh environments
Selection note
Specify the magnet together with the sensor. The operate distance depends on magnet grade and orientation, and a mismatch is the usual reason a design works on the bench and not in production.
Ordering
Send the supply voltage, target distance, magnet type and output requirement. We confirm the operate point and hysteresis, then quote sensor and magnet together.
No documents attached yet.
Request documentation →Related products
View allDM-HALL-L1-SOT23
Bipolar Latching Hall-Effect Sensor, SOT-23
DM-HALL-CS-50A